Cross-flow microfiltration through a 0.8 mum inorganic tubular membrane was enhanced by coupling with a two electrode electrolysis cell producing hydrogen peroxide at high rate, without adding any chemical, by use of carbon felt cathode and dimensional stabilised anode (titanium coated with RuO2).,Anodic oxygen and transfer from atmosphere supplied the required oxygen. The current should be maintained under a maximum value to avoid peroxide reduction. This electrochemical process, called electroperoxidation, upgraded the water quality by removing contaminants that limit mass transport through the membrane, i.e. turbidity, dissolved organic carbon (DOC) and microorganisms. Transient filtration was adjusted to an internal clogging model whose coefficient decreased at the same rate as DOG. The microfiltration steady state flux was multiplied by a factor proportional to the peroxide concentration introduced in the filtration loop. The induced resistance decreased simultaneously with chemical oxygen demand and 254 nm absorbance. Steady state fluxes 2.5 times higher than without treatment were experimentally obtained.