Using the high-resolution pulsed field ionization-photoelectron (PFI-PE) and PFI-PE-photoion coincidence (PFI-PEPICO) techniques, we have examined the formation of methyl cation (CH3+) from the dissociation of energy-selected CH3X+ (X=Br and 1) near their dissociation thresholds. The breakdown diagrams for CH3X thus obtained yield values of 12.834 +/- 0.002 eV and 12.269 +/- 0.003 eV for the 0 K dissociative threshold or appearance energy (AE) for CH3+ from CH3Br and CH3I, respectively. Similar to the observation in PFI-PE studies of CH4, C2H2, and NH3, the PFI-PE spectrum for CH3Br exhibits a step at the 0 K AE for CH3+, indicating that the dissociation of excited CH3Br in high-n (greater than or equal to 100) Rydberg states at energies slightly above the dissociation threshold occurs in a time scale of less than or equal to 10(-7) s. The observed step is a confirmation of the 0 K AE(CH3+) from CH3Br determined in the PFI-PEPICO study. The adiabatic ionization energies (IEs) for the CH3Br+ ((X) over tilde E-2(3/2,1/2)) spin-orbit states were determined by PFI-PE measurements to be 10.5427 +/- 0.0010 and 10.8615 +/- 0.0010 eV, respectively, yielding the spin-orbit coupling constant to be 2571 +/- 4 cm(-1). The AE(CH3+) values from CH3Br and CH3I and the IE[CH3Br+ ((X) over tilde E-2(3/2))] value obtained here, when combined with the known IE of CH3 (9.8380 +/- 0.0004 eV) and IE[CH3I+ ((X) over tilde E-2(3/2))] (9.5381 +/- 0.0001 eV), have allowed accurate determination of the 0 K bond dissociation energies for CH3-Br (2.996 +/- 0.002 eV), CH3+-Br (2.291 +/- 0.002 eV), CH3-I (2.431 +/- 0.003 eV), and CH3+-I (2.731 +/- 0.003 eV). Using the AE(CH3+) from CH3Br and CH3I, together with the known 0 K heats of formation (Delta H-f(0)0) for Br (117.93 +/- 0.13 kJ/mol), I (107.16 +/- 0.04 kJ/mol), and CH3+ (1099.05 +/- 0.33 kJ/mol), we have obtained more precise Delta H-f(0)0 demonstrated that highly reliable Delta H-f(0)0 values for a range of molecules with error limits comparable to those for some of the most precisely measured values, such as Delta H-f(0)0(CH4), can be obtained by PFI-PE and PFI-PEPICO measurements.