교반소요동력 상관식의 수치해석적 연구

이영세; 김문갑; 加藤禎人; Young-Sei Lee; Moon-Gab Kim; Yoshihito Kato

HWAHAK KONGHAK, Vol.39, No.5, 536-544, October, 2001

Export Citation

교반소요동력 상관식의 수치해석적 연구

Numerical Analysis for Power Correlations in an Agitated Vessel

이영세^†, 김문갑, 加藤禎人¹

상주대학교 화학공학과, 상주 742-711
¹나고야공업대학 응용화학과, 나고야 466

Young-Sei Lee^†, Moon-Gab Kim, and Yoshihito Kato¹

Dept. of Chemical Engineering, Sangju National University, Sangju 742-711, Korea
¹Dept. of Applied Chemistry, Nagoya Institute of Technology, Nagoya 466, Japan

E-mail:

초록

교반조내 고점도 유체에 대한 패들 임펠러의 2차원 수치해석 결과를 기초로 지배방정식과 경계조건으로부터 도출된 피라미터를 이용하여 교반임펠러와 교반조벽 사이의 간격이 작은 대형 임펠러로부터 간격이 큰 소형 임펠러에 걸쳐서 광범위하게 적용 가능한 교반소요동력 상관식을 얻었다. 이 상관식에 임펠러 형상을 고려해 넣은 보정 파라미터를 도입하여 앵커 임펠러 및 복잡한 기하형상을 가진 헬리컬 리본 임펠러에도 적용 가능한 수정된 동력상관식을 얻었다.

An attempt has been made to investigate a correlation of power consumption in a laminar region which is based on numerical analysis of two-dimensional flow for paddle impeller in an agitated vessel using geometrical parameters derived theoretically from the govering equations and boundary conditions. It is suggested that the proposed model can be widely adapted from large impeller which has small clearance to small impeller which has large clearance between impellers and agitated wall. Also, a modified model was proposed by introducing correction factors with impeller geometries, which can be applied to paddle, anchor and helical ribbon impellers.

Keywords:Power Correlation;Agitated Vessel;Power Consumption;Numerical Analysis

[References]

Sano Y, Usui H, J. Chem. Eng. Jpn., 18, 47 (1985)
Hiraoka S, Yamada I, Mizoguchi K, J. Chem. Eng. Jpn., 11, 487 (1978)
Hiraoka S, Yamada I, Aragaki T, Nishiki H, Sato A, Takagi T, J. Chem. Eng. Jpn., 21, 79 (1988)
Nonaka H, Kayama T, "Agitated Impeller and Flow Pattern," Kansai and Toukai a Branch, The 2nd Mixing Salon, Satake Chem. Equip. MGF., Ltd. (1991)
Murakami Y, Hisayoshi I, Kazutaka T, 神鋼ペンラツク技報, 35, 1 (1991)
Nagata S, "Mixing, Principles and Applications," Kodansha-A Halsted Press Book (1975)
Yamamoto K, Ph.D. Thesis, Kyoto Univ. (1961)
Hiraoka S, Yamada I, Mizoguchi K, J. Chem. Eng. Jpn., 12, 56 (1979)
Kaminoyama M, Saito F, Kamiwano M, Kag. Kog. Ronbunshu, 14, 786 (1988)
Takeda K, Hoshino K, Shimizu S, Nishihata T, Kag. Kog., 32, 369 (1968)
Nishigawa M, Hashimoto S, Hashimoto K, Kag. Kog. Ronbunshu, 5, 59 (1979)
Mochizuki M, Sato K, Kag. Kog. Ronbunshu, 10, 49 (1984)
Lee YS, Lee SK, Kim JS, HWAHAK KONGHAK, 33(1), 46 (1995)
Nagata S, Yamamoto K, Yokoyama T, Memoirs Fac. Eng. Kyoto Univ., 19, 274 (1957)
Hiraoka S, Kagaku Kogaku no Shinpo No. 22, 133 (1988)
Takahashi K, Arai K, Saito S, J. Chem. Eng. Jpn., 15, 77 (1982)
Chavan VV, Ulbrecht JJ, Ind. Eng. Chem. Proc. Des. Dev., 12, 472 (1973)
Hirose T, Murakami Y, J. Chem. Eng. Jpn., 19, 568 (1986)
Shamlou PA, Edwards MF, Chem. Eng. Sci., 40, 1773 (1985)
Shida H, M.S. Thesis, Nagoya Inst. of Tech. (1993)
Rieger F, Novak V, Trans. Inst. Chem. Eng., 51, 105 (1973)
Schilo D, Chem. Ing. Tech., 41, 253 (1969)
Takahashi K, Yokota T, Konno H, J. Chem. Eng. Jpn., 17, 657 (1984)
Bourne JR, Knoepfli W, Riesen R, Proceedings of 3rd European Conf. on Mixing, 1 (1979)
Kappel M, Int. Chem. Eng., 19, 571 (1979)
Nagata S, Nishikawa M, Goshima S, Nakajima M, Kag. Kog., 34, 1115 (1970)

[Referenced By]

[1] Sano Y, Usui H, J. Chem. Eng. Jpn., 18, 47 (1985)

[2] Hiraoka S, Yamada I, Mizoguchi K, J. Chem. Eng. Jpn., 11, 487 (1978)

[3] Hiraoka S, Yamada I, Aragaki T, Nishiki H, Sato A, Takagi T, J. Chem. Eng. Jpn., 21, 79 (1988)

[4] Nonaka H, Kayama T, "Agitated Impeller and Flow Pattern," Kansai and Toukai a Branch, The 2nd Mixing Salon, Satake Chem. Equip. MGF., Ltd. (1991)

[5] Murakami Y, Hisayoshi I, Kazutaka T, 神鋼ペンラツク技報, 35, 1 (1991)

[6] Nagata S, "Mixing, Principles and Applications," Kodansha-A Halsted Press Book (1975)

[7] Yamamoto K, Ph.D. Thesis, Kyoto Univ. (1961)

[8] Hiraoka S, Yamada I, Mizoguchi K, J. Chem. Eng. Jpn., 12, 56 (1979)

[9] Kaminoyama M, Saito F, Kamiwano M, Kag. Kog. Ronbunshu, 14, 786 (1988)

[10] Takeda K, Hoshino K, Shimizu S, Nishihata T, Kag. Kog., 32, 369 (1968)

[11] Nishigawa M, Hashimoto S, Hashimoto K, Kag. Kog. Ronbunshu, 5, 59 (1979)

[12] Mochizuki M, Sato K, Kag. Kog. Ronbunshu, 10, 49 (1984)

[13] Lee YS, Lee SK, Kim JS, HWAHAK KONGHAK, 33(1), 46 (1995)

[14] Nagata S, Yamamoto K, Yokoyama T, Memoirs Fac. Eng. Kyoto Univ., 19, 274 (1957)

[15] Hiraoka S, Kagaku Kogaku no Shinpo No. 22, 133 (1988)

[16] Takahashi K, Arai K, Saito S, J. Chem. Eng. Jpn., 15, 77 (1982)

[17] Chavan VV, Ulbrecht JJ, Ind. Eng. Chem. Proc. Des. Dev., 12, 472 (1973)

[18] Hirose T, Murakami Y, J. Chem. Eng. Jpn., 19, 568 (1986)

[19] Shamlou PA, Edwards MF, Chem. Eng. Sci., 40, 1773 (1985)

[20] Shida H, M.S. Thesis, Nagoya Inst. of Tech. (1993)

[21] Rieger F, Novak V, Trans. Inst. Chem. Eng., 51, 105 (1973)

[22] Schilo D, Chem. Ing. Tech., 41, 253 (1969)

[23] Takahashi K, Yokota T, Konno H, J. Chem. Eng. Jpn., 17, 657 (1984)

[24] Bourne JR, Knoepfli W, Riesen R, Proceedings of 3rd European Conf. on Mixing, 1 (1979)

[25] Kappel M, Int. Chem. Eng., 19, 571 (1979)

[26] Nagata S, Nishikawa M, Goshima S, Nakajima M, Kag. Kog., 34, 1115 (1970)