Tagged, negatively charged, liposomes are used to amplify DNA sensing processes. The analyses of the target DNA are transduced electrochemically by using Faradaic impedance spectroscopy, or by microgravimetric measurements with Au-quartz crystals. By one method, a probe oligonucleotide (1) is assembled on Au-electrodes or Au-quartz crystals. The formation of the double-stranded assembly with the analyte DNA (2) is amplified by the association of the 3-oligonucleotide-functionalized liposomes to the sensing interface. The target DNA is analyzed by this method with a sensitivity limit that corresponds to 1 x 10(-12) M. A second method to amplify the sensing of the analyte involves the interaction of the 1-functionalized electrode or Au-quartz crystal with the target DNA sample (2) that is pretreated with the biotinylated oligonucleotide (4). The formation of the three-component double-stranded assembly between 1/2/4 is amplified by the association of avidin and biotin-labeled liposomes to the sensing interfaces. By the secondary association of avidin and biotin-tagged liposomes, a dendritic-type amplification of the analysis of the DNA is accomplished. The analyte DNA (2) is sensed by this method with a sensitivity Limit corresponding to 1 x 10(-13) M. The biotin-tagged liposomes are also used to probe and amplify single-base mismatches in an analyte DNA. The 6-oligonucleotide-functionalized An-electrode or Au-quartz crystal was used to differentiate the single-base mismatch (G) in the mutant (5) from the normal A-containing gene (5a). Polymerase-induced coupling of the biotinylated-C-base to the double-stranded assembly generated between 6 and 5 followed by the association of avidin and biotin-tagged Liposomes is used to probe the single base mismatch. The functionalized liposomes provide a particulate building unit for the dendritic amplification of DNA sensing.