화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
HWAHAK KONGHAK, Vol.39, No.6, 757-762, December, 2001
Export Citation
반 회분식 반응기에서 polypropylene의 등온 및 비등온 열분해반응 특성
Isothermal and Non-isothermal Pyrolysis Characteristics of Polypropylene in Stirred Batch Reactor
김승수†, 박찬진1, 김성현2
  • 동해대학교 환경공학과, 동해 240-713
  • 1시립인천전문대학 환경공업과, 인천 402-060
  • 2고려대학교 화학공학과, 서울 136-701
Seung-Soo Kim†, Chan Jin Park1, and Sung Hyun Kim2
  • Department of Environmental Engineering, Dong Hae University, 119, Jiheung-dong, Dong Hae, Kangwondo 240-713, Korea
  • 1Department of Environmental Engineering, Incheon City College, 235, Dohwa-dong, Nam-gu, Inchon 402-060, Korea
  • 2Department of Chemical Engineering, Korea University, 1, 5-Ka, Anam-dong, Seongbuk-Ku, Seoul 136-701, Korea
E-mail:
초록
열중량 분석법을 이용하여 반 회분식 반응기에서 승온속도를 0.5, 1.0 및 2.0 ℃/min로 변화시키면서 polypropylene의 열분해반응 속도실험을 수행하였다. 미분법을 이용하여 polypropylene의 열분해 전환율이 1%에서부터 100%일 때까지의 활성화에너지 및 반응차수를 구하였다. 반응이 급격하게 진행되는 구간에서 활성화에너지는 208-288 kJ/mol까지 점진적으로 증가하였으며 반응차수는 0.01이었다. 반 회분식 반응기에서 반응온도를 410-430 ℃로 변화시키면서 60분 동안 열분해반응 실험을 수행한 결과 반응온도가 증가할수록 생성된 열분해 오일의 양은 증가하지만 생성물의 탄소수 분포는 거의 일정하게 나타났으며, 특정한 탄화수소화합물에 대한 선택성은 나타나지 않았다.
Kinetic tests on pyrolysis of polypropylene were carried out by thermo gravimetric technique heating the sample at the rates of 0.5, 1.0, 2.0 ℃/min in a stirred batch reactor. The activation energy and the reaction order were determined at conversions from 1 to 100%. The activation energies increased slowly from 208 kJ/mol to 288 kJ/mol and the reaction order was 0.01. Polypropylene was thermally cracked in a semi-batch reactor at 410-430 ℃ for 60 minutes. As the reaction temperature increased, the yields of product oil increased. However, the selectivity of specific hydrocarbons was not observed.
Keywords:Polypropylene;Pyrolysis;Thermogravimetric Technique;Stirred Batch Reactor;Carbon Number Distribution
  1. Register of Korean Plastic Industries, Plastics Information (1999)
  2. Kim SS, "Pyrolysis Characteristics of Waste Lubricating Oil, Plastics, and their Mixtures," Ph.D. Thesis, Korea University (2000)
  3. Kim SS, Kim SH, Fuel, 79, 1943 (2000) 
  4. Kim SS, Yun WL, Kim SH, HWAHAK KONGHAK, 37(6), 828 (1999)
  5. Kim SS, Chun BH, Park CJ, Yoon WL, Kim SH, HWAHAK KONGHAK, 38(5), 732 (2000)
  6. Kim HT, Song BS, Park CH, Park YH, "A Study on The Generation and The New Technologies for the Recycling of The Commingled Plastics Waste," Korea Resources Recovery & Reutilization Corporation (1996)
  7. Choi JW, Polym. Technol., 36(Sep.), 38 (1996)
  8. Brandrup J, "Recycling and Recovery of Plastics," Hanser Publishers (1996)
  9. Scheirs J, "Polymer Recycling," John Wiley & Sons (1998)
  10. Liebman SA, Levy EJ, "Pyrolysis and GC in Polymer Analysis," Marcel Dekker, Inc. (1984)
  11. Hong SJ, Oh SC, Lee HP, Kim HT, Yoo KO, HWAHAK KONGHAK, 37(4), 515 (1999)
  12. Park YG, Choi BS, Oh JS, Lee SW, Yi J, HWAHAK KONGHAK, 38(1), 103 (2000)
  13. Namkoong S, Bae HK, HWAHAK KONGHAK, 5(3), 179 (1967)
  14. Kim YS, Hwang GC, Bae SY, Yi SC, Korean J. Chem. Eng., 16(2), 161 (1999)
  15. 三方信行, 省エネルギ, 46(4), 50 (1994)
  16. Fessenden RJ, Fessenden JS, "Organic Chemistry," 5th Ed. (1993)
  17. 西尾末廣, 上野晃史, 大北博宣, 角田範義, 觸媒(Japan), 36(5), 342 (1994)
  18. ASTM D 2887, "Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography,"
  19. Lintelmann KA, Anal. Chem., 67(12), 327 (1995) 
  20. Westerhout R, "Recycling of Plastic Waste by High Temperature Pyrolysis," Ph.D. Thesis (1998)