We investigated the batch settling behavior of the kaolin slurry and the UK ball clay slurry at various initial solids fractions (phi(0)s) using a computerized axial tomography scanner (CATSCAN). The spatio-temporal evolutions of solids fractions in the consolidating sediments were continuously monitored. Since the interface between the sediment and the supernatant of the investigated slurries was blurred, an averaging procedure was employed to estimate their null-stress solids fractions (phi(g)s). Besides the rather slow settling for the high-phi(0) slurries, the basic settling characteristics resemble each other regardless of whether phi(0) > phi(g) or vice versa. The above-mentioned experimental data reveal that the investigated slurries are neither purely elastic nor purely plastic in theological behavior. On contrary to most model works a blurred supernatant-sediment interface makes difficulty in the gel point determination. During initial settling the high-phi(0) slurries clearly exhibit a finite yield stress to resist deformation. That is, the slurries are plastic fluids. However, the network structure in the slurries deteriorates gradually in the subsequent settling stage while the final, equilibrated sediment reveals a continuous distribution in solids fraction. Restated, the final sediment possesses as a purely elastic characteristic. The model parameters of theory by Buscall and White were regressed by the dynamic consolidating sediment data, while those by Tiller and Leu were obtained using the final equilibrated sediment data. Calculations from both models reveal that ball clay slurry is more compressible than is the kaolin slurry. The high-phi(S0) slurry would yield the less compressible sediment.