Lipozyme IM20 from Novo Nordisk (Denmark) was examined after various treatments. Conditions were chosen to reflect those that would be considered in the design of an industrial process. A two-level factorial design was employed to assess the effects of pressurization/depressurization cycles, rate of depressurization and exposure length. A significant three-factor interaction was observed. Lowest residual activity was observed for runs in which the depressurization rate was 86-89 bar min(-1). Incubation for 12 h also yielded low residual activity but only when exposing the immobilized enzyme to one cycle. The highest residual activity was obtained for immobilized enzymes repeatedly exposed for periods of 12 h (5 times) with a depressurization rate of 4.3 to 4.45 bar min(-1). This effect may be due to the extraction of an inhibiting compound. Tuning process parameters can lead to a seven-fold change in residual activity.