pyrolysis of tetra pack in nitrogen was investigated with a thermogravimetric analysis (TGA) reaction system. The pyrolysis kinetics experiments for the tetra pack and its main components (kraft paper and low-density poly(ethene) (LDPE)) were carried out at heating rates (beta) of 5.2, 12.8, 21.8 K min(-1). The results indicated that the one-reaction model and two-reaction model could be used to describe the pyrolysis of LDPE and kraft paper respectively. The total reaction rate of tetra pack can be expressed by the summation of the individual class of LDPE and kraft paper by multiplying the weighting factors. The pyrolysis products experiments were carried out at a constant heating rate of 5.2 K min(-1). The gaseous products were collected at room temperature (298 K) and analyzed by gas chromatography (GC). The residues were collected at some significant pyrolysis reaction temperatures and analyzed by an elemental analyzer (EA) and X-ray powdered diffraction (XRPD). The accumulated masses and the instantaneous concentrations of gaseous products were obtained under the experimental conditions. The major gaseous products included non-hydrocarbons (CO2, CO, and H2O) and hydrocarbons (C1-5). In the XRPD analysis, the results indicated that pure aluminum foil could be obtained from the final residues. The proposed model may be supported by the pyrolysis mechanisms with product distribution.