The oxygen reduction reaction (ORR) at cobalt tetraazaanulene (CoTAA) modified electrodes was investigated. As a first approach, modified electrodes were prepared by electrodeposition of CoTAA on glassy carbon (GC). The modification of the GC surface was monitored by u.v.-vis. differential reflectance spectroscopy (UVDRS). The recorded spectra (i.e., absorbance as a function of wavelength and time) showed that the electrodeposition of CoTAA at 0.8 V vs Ag|AgCl, that is, at a potential where the TAA ligand is oxidized to TAA(+.), seems to produce a thin polymer film. Starting from these preliminary results, porous rotating disc electrodes (RDEs) were prepared by electrodeposition of CoTAA (0.8 V vs Ag\AgCl, 1 min) on graphite powder embedded in a recast Nafion(R) film. The use of a porous RDE allowed comparison of the activity and selectivity of Pt nanoparticles and CoTAA for the ORR under experimental conditions close to those of a fuel cell cathode, that is, at the catalyst\Nafion(R) interface. The activity towards the ORR of a porous electrode modified by electrodeposition of CoTAA is not affected when methanol is present in the electrolyte phase, whereas a noticeable decrease in the activity of Pt-based oxygen cathodes was observed under the same conditions. Half-cell life tests showed that CoTAA-modified electrodes and Pt-based electrodes have a comparable stability over a period of 90 min.