Copolymers containing oxime-urethane groups were prepared by the copolymerization of methyl methacrylate and benzophenoneoximinocarbonylaminoethyl methacrylate (BCM), and their photochemical properties were examined from the UV and IR absorption spectral changes. The decomposed fraction of oxime-urethane groups in the copolymer increased with irradiation time, but it decreased with the content of BCM units in the copolymer. Changes of the surface properties of the copolymer film on irradiation were studied by measurements of the contact angle and dyeing with an acid dye. The surface of the copolymer film changed to become more hydrophilic upon irradiation with 254 nm of UV light. After the irradiated copolymer films were treated with HCl or methanol, changes of the contact angle of water on irradiation were compared. The copolymer film was dyed by acid dyes after treatment of the irradiated film with HCl The degree of dyeing increased with irradiation time and BCM units in the copolymer, but it was unaffected by the film thickness. Various colors were developed on the irradiated area depending on the acid dye as the developer.