Two important properties of absorptive glass mat (AGM) separators are examined in order to design optimum separators for advanced valve-regulated lead-acid (VRLA) batteries. Acid stratification in the separator depends on its micro-glass-fibre diameter, and it is found that the extent of stratification can be estimated based on hydrodynamics theory. Decreasing the plate-group pressure of the separator in the wetted state is also investigated, and it is considered that the phenomenon is caused by the balance between the fibre strength and the surface tension of acid solution. Given these results, the way to design AGM separators according to purpose has been identified. Accordingly, a new AGM separator has been developed and this functions both to suppress stratification and to maintain plate-group pressure.