화학공학소재연구정보센터
Biomass & Bioenergy, Vol.24, No.6, 411-427, 2003
Quantity and quality of harvestable biomass from Populus short rotation coppice for solid fuel use - a review of the physiological basis and management influences
Woody biomass from poplar and aspen (Populus sp.) short rotation coppice (SRC) has good combustion properties compared to non wood so-lid bio fuels and fossil solid fuels. This review compiles and discusses relevant literature on fuel quality and yield for Central European conditions. The most problematic quality parameter of woody biomass from Populus SRC is its high water content at harvest time (55-60%). Storing unchipped material on the field during summer is an efficient tool to lower it. In-order to control other quality parameters-mainly nitrogen (N), potassium (K) and heavy metal-contents but also yield-one has to take into account the physiological back-ground of SRC. Important features are species/clone,-age of sprouts, growth-pattern, site and nutrient cycling. Maximum mean annual increment (MAI) occurs later than in willows. Therefore rotations should be longer than in willow: at least 6-7 years for poplars and,-due to differences in growth pattern, 10 to 12 years for aspen. Both results in MAIs of 10-12 o.d.t. ha(-1) yr(-1) and reduced nutrient concentrations due to a lower share of branches and twigs in the harvested biomass. However, with elongated rotations costs rise because yet no automated (and thus cheap) harvest methods for large stern-diameters were developed. Although sometimes ignored poplars are demanding concerning site characteristics. Basic requirements are good water (minimum 350 mm rainfall during growing season) and nutrient supplies, deep soils and favourable climatic conditions (average air temperature between June and September at least 14degreesC). Only aspen are partly suited for poorer conditions. For Populus-SRC in general weed control during establishing phase is essential. (C) 2003 Elsevier Science Ltd. All rights reserved.