화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Journal of Chemical Engineering, Vol.20, No.4, 716-723, July, 2003
DOI10.1007/BF02706914  Export Citation
Predispersed Solvent Extraction of Negatively Complexed Copper from Water Using Colloidal Liquid Aphron Containing a Quaternary Ammonium Salt
Hyung Chul Hahm, Dong Woo Lee, Won Hi Hong†, Tai-yong Lee, and Choul Ho Lee1
  • Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 373-1 Kusung-dong, Yusung-gu, Daejeon 301-701, Korea
  • 1Department of Chemical Engineering, Kongju National University, 182 Shinkwan-dong, Kongju, Chungnam 314-701, Korea
E-mail:
Negatively complexed copper ion by complexing agent like EDTA (Ethylenediaminetetraacteic acid) was removed by predispered solvent extraction (PDSE) using colloidal liquid aphrons (CLAs) made out of Trioctylmetylammonium chloride (Aliquat 336) diluted with nonpolar kerosene. PDSE was found to have higher mass transfer rate than conventional solvent extraction under experimental conditions without mechanical mixing. The effect of type of water-soluble surfactants, phase volume ratio (PVR), concentration of anionic Sodium Dodecyl Benzene Sulfonate (SDBS) on PDSE was investigated. In addition, the effect of anionic SDBS on back extraction in PDSE was also studied. Under experimental conditions with enough mechanical mixing, the amount of copper transferred to Aliquat 336 core from the pregnant phase was compared in both PDSE by using anionic SDBS and conventional solvent extraction. It is concluded that PDSE using Aliquat 336 CLA can be used for treatment of negatively complexed copper without the influence of surfactant. To optimize CLAs-based process, stability of CLAs containing a quaternary ammonium salt Aliquat 336 diluted with kerosene in the continuous phase was investigated by measuring the volume released to surface. To destabilize CLAs, H(+), OH(-) were added. Stability of CLAs was estimated by comparing the half-life obtained. Break-up of destabilization follows pseudo-first-order reaction kinetics at low ionic strength. But, pseudo-first- order model cannot be applied to a region of high ionic strength.
Keywords:Colloidal Liquid Aphron;Predispersed Solvent Extraction;Copper;Trioctylmetylammonium Chloride (Aliquat 336);Stability
  1. Hahm HC, Hong WH, Lee CH, Clean Technol., 7(4), 291 (2001)
  2. Juang RS, Chen YJ, Huang IP, Sep. Sci. Technol., 34(15), 3099 (1999) 
  3. Kang W, Yi L, Baoyan Q, Guangzhi L, Zhenyu Y, Jichun H, Colloids Surf. A: Physicochem. Eng. Asp., 175, 243 (2000) 
  4. Kim BS, Hong YK, Hong WH, Korean J. Chem. Eng., 19(4), 669 (2002)
  5. Lee DW, Hong WH, Lee TY, Lee CH, Sep. Sci. Technol., 37(8), 1897 (2002) 
  6. Lee DW, Hong WH, Hwang KY, Sep. Sci. Technol., 35(12), 1951 (2000) 
  7. Lye GJ, Stuckey DC, Chem. Eng. Sci., 56(1), 97 (2001) 
  8. Lye GJ, Stuckey DC, "Proceedings International Solvent Extraction Conference," Melbourne, Australia, ed by Shallcross, D.C., Paimin, R. and Prvcic, L.M., 1399-1405 (1996)
  9. Lye GJ, Stuckey DC, Colloids Surf. A: Physicochem. Eng. Asp., 131, 119 (1998) 
  10. Save SV, Pangarkar VG, Kumar SV, Sep. Technol., 4(2), 104 (1994) 
  11. Scarpello JT, Stuckey DC, J. Chem. Technol. Biotechnol., 74(5), 409 (1999) 
  12. Seader JD, Henley EJ, "Separation Process Principles," Wiley, New York (1998)
  13. Sebba F, Chem. Eng. Commun., 48, 155 (1986)
  14. Sebba F, "Foams and Biliquid Foams: Aphrons," Wiley, New York (1987)
  15. Sebba F, Sep. Sci. Technol., 20, 331 (1985)
  16. Spearot RM, Peck JV, Environ. Prog., 3(2), 124 (1984)
  17. Srivastava P, Hahr O, Buchholz R, Worden RM, Biotechnol. Bioeng., 70(5), 525 (2000) 
  18. Zhang C, Valsaraj KT, Constant WD, Roy D, Sep. Sci. Technol., 31(8), 1059 (1996)