Korean Journal of Chemical Engineering, Vol.20, No.6, 1118-1122, November, 2003
Filtration and Dust Cake Experiment by Ceramic Candle Filter in High Temperature Conditions
E-mail:
Particulate collection at high temperature and high pressure (HTHP) is important in an advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection in the advanced coal power generation system. However, rigid ceramic filters and granular bed filters among them show the best potential. The problems experienced of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters have the best potential for IGCC at this moment because they have nearly the highest efficiency compared with other filtering systems and have accumulated many reliable design data from many field experiences. The purpose of this study was to investigate the efficiency of ceramic filters and stability of material against high temperature and longterm operation condition by applying fly ash on the surface of the filter and relation of pressure drop and dust cake thickness. Experimental conditions were 50 hours at 450 ℃, 650 ℃ and 850 ℃.
Keywords:Coal Power Generation;Ceramic Filter;Pressure Drop;Dust Cake Thickness;Long Term Operation in High Temperature
- Alvin MA, "Evaluation of Ceramic Filter Materials, Selection for Application," Proceedings of the Coal-Fired Power Systems 93-Advanced in IGCC and PFBC Review Meetings, DOE, Morgantown, DE 93000289, 515 (1993)
- Alvin MA, Lane JE, Tressler RE, Jakus K, "Long Term High-temperature Degradation of Ceramic Cross-flow Filter," Proceedings of the Ninth Annual Gasification and Gas Stream Cleanup Systems Contractors Review Meeting, METC, Morgantown, WV, 129 (1989)
- Choi JH, Chung JD, Theor. Appl. Chem. Eng., 1, 891 (1995)
- Choi JH, Keum SM, Chung JD, Korean J. Chem. Eng., 16(6), 823 (1999)
- Choi JH, Kim SK, Ha SJ, Park YO, Korean J. Chem. Eng., 18(4), 456 (2001)
- Dust M, Reinhardt A, Vollmer H, Koch W, "Filtration & Separation," Academic Press, London (1994)
- Gilliberti DF, Lippert TE, Inst. Chem. Eng. Symp., 331, 3 (1986)
- John S, "Grimethrope High-temperature/High-pressure Gas Filter-Experimental Program," EPRI TR-100499, 2, 5 (1992)
- Kanaoka C, Kishima T, Furuuchi M, "Accumulation and Release of Dust from Rigid Ceramic Filter Element," 3rd International Symposium on Gas Cleaning at High Temperatures, 183 (1996)
- Laux S, Giernoth B, Bulak H, Renz U, "Aspects of Pulse Jet Cleaning of Ceramic Filter Elements," Aachen Univ., Germany (1990)
- Laux S, Giernoth B, Bulak H, Renz U, "Hot Gas Filtration with Ceramic Filter Elements," Proceedings of the 12th International Conference on Fluidized-Bed Combustion, San Diego, U.S.A., May 3-13 (1993)
- Laux S, Schiffer HP, Renz U, "Performance of Ceramic Filter Elements for Combined Cycle Power Plant High Temperature Gas Clean-Up," Proceedings of the 11th International Conference on Fluidized-Bed Combustion, Montreal, Canada, April 21-25 (1991)
- Pulkrabek W, Ibele W, Int. J. Heat Mass Transf., 30, 1103 (1987)
- Seville JPK, Ivatt S, Burnard GK, "Recent Advances Particulate Removal from Hot Process Gases," 3rd International Symposium on Gas Cleaning at High Temperatures, 3 (1996)
- Yang DH, Lee DH, Han GY, Korean J. Chem. Eng., 19(6), 1112 (2002)