Jute textile was recycled into composites using different percents of phenol formaldehyde (PF) resin. The effect of the resin percent, from 12 to 30%, on the flexural strength, tensile strength, water absorption, and thickness swelling of the produced composites was studied. To improve the dimensional stability of the produced composites, jute textile was acetylated or steamed. The effect of steaming and acetylation on the structure and thermal stability of jute fibers was studied using Fourier Transform Infrared (FTIR) spectroscopy and Thermogravimetric analysis (TGA), respectively. The effect of these treatments on the flexural strength, tensile strength, water absorption, and thickness swelling of the produced composites was studied. Steaming of jute textile was superior to acetylation in improving the dimensional stability. Cyclic wetting and drying test of the composites showed that steaming of the jute textile resulted in much less irreversible and reversible thickness swelling than in case of using acetylated or untreated jute textile. (C) 2003 Wiley Periodicals, Inc.