A photopolymerization process at room temperature was devised to copolymerize vinyl acetate (VAc) and n-butyl acrylate (BA) mainly to prepare rubber-like damping sheet bearing pressure-sensitive adhesive property in this study. The investigations using both the differential scanning calorimeter and rheometric dynamic analysis show the existence of two glass transition temperatures for each copolymer. The scanning electron microscopic pictures reveal that the degree of microphase separation increases with increasing annealing time at 70degreesC. It was suggested that the rubbery domain (formed by the PBA blocks) disperses in the glassy domain (constituted by the PVAc blocks), making an effective damping entity. Excellent damping was observed for the copolymer samples, with the tandelta peak values as high as 1.76-1.80 at a certain temperature range and with tandelta> 0.3 at quite wide temperature ranges. In addition, the copolymers containing more VAc tend to have the higher damping. (C) 2003 Wiley Periodicals, Inc. J Appl Polyrn Sci 91: 1396-1403,2004.