Blends of poly(trimethylene terephthalate) (PTT) and poly(ethylene terephthalate) in the amorphous state were miscible in all of the blend compositions studied, as evidenced by a single, composition-dependent glass-transition temperature observed for each blend composition. The variation in the glass-transition temperature with the blend composition was well predicted by the Gordon-Taylor equation, with the fitting parameter being 0.91. The cold-crystallization (peak) temperature decreased with an increasing PTT content, whereas the melt-crystallization (peak) temperature decreased with an increasing amount of the minor component. The subsequent melting behavior after both cold and melt crystallizations exhibited melting point depression behavior in which the observed melting temperatures decreased with an increasing amount of the minor component of the blends. During crystallization, the pure components crystallized simultaneously just to form their own crystals. The blend having 50 wt % of PTT showed the lowest apparent degree of crystallinity and the lowest tensile-strength values. The steady shear viscosity values for the pure components and the blends decreased slightly with an increasing shear rate (within the shear rate range of 0.25-25 s(-1)); those of the blends were lower than those of the pure components. (C) 2004 Wiley Periodicals, Inc.