We report on the photoinduced superhydrophilicity of the surface of amorphous TiO2. Amorphous TiO2 thin films were prepared on self-assembled monolayers by the peroxotitanate-complex deposition (PCD) and liquid-phase deposition (LPD) methods. The surface morphology and topography were characterized in detail. The contact angles were 34degrees and 66degrees for the as-deposited thin films through the PCD and LPD methods, respectively, which slowly increased to about 70degrees and 73degrees after being stored in air. After irradiation by UV light, the contact angle vanished and the surface exhibited superhydrophilicity. The superhydrophilicity and hydrophobicity could be switched by alternatively exposing the surface to UV light and drying in an atmosphere filled with organic gases. Although the oxidation of the contamination on the surface has effects on the increase in hydrophilicity, the X-ray photoelectron spectroscopy results suggested that the superhydrophilicity was also related to the transformation of the Ti-OH groups to groups that have dangling bonds. This paper indicates that an amorphous TiO2 thin film does not need to be heated to obtain superhydrophilicity; such a self-cleaning surface can be achieved at room temperature by our newly developed environmentally friendly method.