In a previous paper [J. Mater. Sci. 38 (2003) 823] we have described the preparation and characterization of conventional alkoxide sol-gel derived TiO2 films [J. Mater. Sci. 23 (1988) 2259] and of TiO2 powder enriched alkoxide sol-gel derived films. The powder films were prepared on flat stainless steel substrates and on glass beads. These films were characterized for various parameters like particle size, crystal phase, pore size, thickness and mechanical properties. In our current study, the photocatalytic activities of these sol-gel derived TiO2 films were studied utilizing a quartz batch reactor. The quartz batch reactor was characterized for parameters like mixing, recycle, aeration and UV radiation flux, and the TiO2 coated substrates were used as the photocatalyst. The activities of the catalyst films were evaluated by measuring the degradation rate of 4-chlorobenzoic acid used as a model organic pollutant. Immobilized TiO2 powder films on stainless steel containing a mixture of anatase and rutile phases were found to be more effective than films that were substantially composed of anatase phase particles. The activity of glass beads coated with TiO2 powder was compared to the activity of commercially available TiO2 catalyst beads. While the activity of the commercially available TiO2 catalyst beads was higher there was significant attrition of the TiO2 catalyst film. The films on the glass beads possessed better mechanical properties than the commercial catalyst beads and their activity can be significantly improved by optimizing the film synthesis process parameters. (C) 2003 Elsevier B.V. All rights reserved.