Silicalite-filled poly(siloxane imide) (PSI) membranes were prepared for the separation of volatile organic compounds (VOCs) from water via pervaporation. PSI copolymer was synthesized by polycondensation of 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BTDA) with a siloxane-containing diamine, e.g., poly(dimethylsiloxane), bis(3-aminopropyl) terminated (PSX), added with 3,3-diaminodiphenyl sulfone (DDS). 2,4,6-Triamine pyrimidine (TAP) was added into the casting solution in order to enhance the compatibility between the polymeric matrix and the filler, silicalite. The PSI membranes were characterized by SEM. The surface morphology for the membrane with the addition of TAP differs from that without TAP. The latter seems to be consisting of particles in the membrane surface. The sorption selectivity of the PSI membranes for chloroform/water solutions was investigated, and there was a highest value for it around 50 wt.% of PSX content. The pervaporation performance of the membranes was studied with the separation of chloroform/water mixture. The silicalite-filled membrane with 120 mum thickness exhibit a high total permeation flux of 280 g m(-2) h(-1) with separation factor of 52.2 for 1.2 wt.% of the chloroform/water mixture. (C) 2003 Elsevier B.V. All rights reserved.