One of the most important claims for the plasma technique as a surface treatment is that it modifies only a few atomic layers of materials. However, with polymers, this assumption must be carefully verified to keep the bulk mechanical properties constant. Besides the oxidation of the film, with specific plasma conditions such as high power and duration, the polypropylene film structure is also modified in the bulk through vacuum ultraviolet absorption and thermal relaxation. This change is associated with smectic- and amorphous-phase transformation into an a-monoclinic phase, with a rapid rate for the smectic transformation and a slower rate for the amorphous transformation. At the same time, the crystallite size increases, and the polypropylene film texture is planar and moderated (1.7 mrd at the maximum of the distribution, with a discharge power of 100 W and a treatment duration of 10 min). (C) 2004 Wiley Periodicals, Inc.