The relation between the intrinsic mechanism of various N2O conversions over FeMFI catalysts and the nature of the active iron site(s) has been analyzed. To this end, direct N2O decomposition and N2O reduction with CO in the absence or presence of NO were investigated using a combination of transient pulse and steady-state techniques over steam-activated FeMFI zeolites with a similar iron content (0.6-0.7 wt% Fe) and different framework compositions (Si-Al, Si-Ga. Si-Ge, and Si). The forms of iron in the catalysts were characterized by UV/vis and HRTEM. The intrinsic reaction mechanism determines the optimal iron site distribution, which can be modulated by tuning the steaming temperature during activation. Oligonuclear iron oxo clusters in the zeolite channels are essential in direct N2O decomposition due to a faster desorption of O-2 as compared to isolated ions. Such forms of active iron can be achieved at a lower steam-activation temperature over FeAlMFI and FeGaMFI (900 K) than over FeGeMFI and FeMFI (1150 K). Contrarily, zeolites with a more uniform distribution of isolated iron species lead to higher activities in N2O reduction with CO as compared to highly clustered catalysts. In this case, O-removal as CO2 is strongly accelerated vis-A-vis O-2 desorption in direct N2O decomposition. The dual role of NO as a promotor in N2O decomposition and as an inhibitor in N2O reduction also supports the participation of different sites in both types of conversions. NO selectively inhibits N2O reduction over isolated iron ions, further evidencing the essential role of oligonuclear iron clusters in the NO-assisted N2O decomposition. (C) 2004 Elsevier Inc. All rights reserved.