The macro-texture was related to the nano-platelets formed during the rolling deformation of a Co-Ni-Cr-Mo alloy (MP35N) with low stacking fault energy. The deformed materials showed {011}(533) texture but also had {011}(211) and {011}(100) texture components. The {011}(533) component reached the maximum at 74% reduction-in-area. Further deformation of the material to 80% decreased the intensity of the {011}(533) component. The cold deformation introduced platelets of a few atomic layer in thickness and less than 100 nm in diameters. The habit planes of the platelets were identified to be {111}, which were perpendicular to both the rolling and {011} crystallographic plane. Therefore, the tensile strain in the rolling direction assisted formation of the platelets, which were identified as stacking faults. A high density of nano-platelets and dislocations strengthened materials and influenced the plastic deformation behaviors and texture evolution. Thus, the MP35N developed slightly different textures from other low stacking fault energy materials. The maximum at {011} (533) was related the nanoplatelets and stacking fault energy. The {011}(112) and {110}(001)components could be linked to the low stacking fault energy. (C) 2004 Kluwer Academic Publishers.