The aim of this paper is to present the evolution of plug flow developing in three densely packed granular materials in the model of a hopper made of Plexiglas. For this purpose, the digital particle image velocimetry (DPIV) technique is applied to analyse the flow field of the granular material. When discharge starts, a plug flow zone in the flowing material expands upward. This zone changes its width reaching the upper surface of the material. The plug flow evolution as a function of time is described using DPIV. This technique yields the velocity profiles of flowing granular materials, velocity magnitude contours, vector fields, velocity distributions on certain levels in the model and traces of the selected particles. The results obtained for the evolution of the vertical velocity, height and width of the plug flow zone as a function of time, measured at the symmetry axis of the model for the amarantus seed are compared to the results obtained by Waters and Drescher. Measurements of the stagnant boundary as a function of time are compared to the results available in the literature. (C) 2004 Elsevier Ltd. All rights reserved.