Separation of colloidal particles of different sizes is becoming increasingly important due to rapid developments in the area of proteomics, genetic engineering, drug discovery, etc. In particular, there is a need to accomplish these separations on a microscale in 'lab-on-a-chip' devices. In this paper, we propose a new method for accomplishing separation of charged colloids of different sizes in a microchannel. This method involves a combination of pulses of lateral electric fields and Poiseuille flow in the axial direction. We develop a model for this separation technique and obtain closed form solutions for the mean velocity and the dispersion coefficient for a pulse of molecules introduced into the channel. These expressions are then utilized to determine the channel length and the separation time. For reasonable value of design constants, the proposed technique can separate molecules of different sizes that have diffusivities of 10(-10) and 0.5 x 10(-10) m(2)/s in 15.7 s in a 3.7 mm long channel. The length and the time increase to 5.45 cm and 231 s if the ratio of the diffusivities is reduced from 2 to 1.2, i.e., the latter diffusivity is increased to 0.835 x 10(-10) m(2)/s, while keeping all the other parameters the same. If the diffusivities are about 10(-9) m(2)/s, the length and the time for separation are 1 cm and 17.5 s for D-1/D-2 = 2, and 16 cm and 269 s for D-1/D-2 = 1.2. (C) 2004 Elsevier Inc. All rights reserved.