Diamond-like carbon (DLC) films were prepared by unbalanced magnetron sputtering. Ti-doped DLC films were obtained by Ti ion implanted into the achieved DLC films using metal vapor vacuum arc (MEVVA). The effects of Ti+ ion implantation on the surface morphology, structure, and tribological properties of the DLC films were investigated by means of atomic force microscopy (AFM), Raman spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and friction measurement. The smooth and uniform Ti-doped film with the surface roughness of 0.595 nm was obtained. Raman result revealed that the formation of DLC films and sp(2) bonds content increase by Ti+ ion implantation. TEM showed that the nanocrystalline phases of TiC were formed in the films. Ti+ was implanted into the interface between C and substrate, detecting the sputtering depth profiles of the film by XPS; thus, the interface was widened due to reserve diffusion. Tribological test experiment indicated that friction coefficient of the films decreased to approximately 0.15 by Ti+ ion implantation. (C) 2004 Published by Elsevier B.V.