The concept of a critical supersaturation ratio (CSSR) has been used to characterize the effectiveness of different types of scale inhibitors, inhibitor concentration, and precipitating solution pH in order to prevent the formation of barium sulfate scale. The scale inhibitors used in this work were aminotrimethylene phosphonic acid (ATMP), diethylenctriaminepentamethylene phosphonic acid (DTPMP), and phosphinopolycarboxylic acid polymer (PPCA). The CSSR at which barium sulfate precipitates was obtained as a function of time for different precipitation conditions and was used as an index to evaluate the effect of the precipitation conditions. The results showed that the CSSRs decrease with increasing elapsed time after mixing the precipitating solutions, but increases with increasing scale inhibitor concentration and solution pH. The CSSR varies linearly with the log of the scale inhibitor concentration and with the precipitating solution pH. A SEM analysis showed that the higher the scale inhibitor concentration and solution pH, the smaller and more spherical the BaSO4 precipitates. Analysis of the particle size distribution revealed that increasing the elapsed time, the scale inhibitor concentration, and precipitating solution pH, all produce a broader particle size distribution and a smaller mean diameter of the BaSO4 precipitates. DTPMP and PPCA were the most effective BaSO4 scale inhibitors per ionizable proton and the most effective on a concentration basis, respectively. (c) 2004 Elsevier Inc. All rights reserved.