The flow pattern in a silo is important because it affects both the recovery of solids and the pressures on the silo wall during discharge. Wherever mass flow is not achieved, the boundary of the flow channel has significant implications for both the functional and structural design of the silo. Many techniques have been used for the study of flow patterns in model silos, but most cannot be used at full scale, and very few quality measurements at full scale have ever been made. This paper outlines a full scale experimental study in which the patterns of solids flow and the flow channel boundaries are reliably quantified. The full scale silo was specially designed, constructed and instrumented to exhibit funnel flow and to make observations of the solids flow pattern and the silo wall pressures. It had three outlets: one concentric, one fully eccentric and one in between. Three materials were used: iron ore pellets, slag fines and crushed basalt. This paper describes experiments involving iron ore pellets. The silo was seeded with radio frequency tags whose residence times were measured by detecting them on exit during discharge. The residence time data were studied to deduce the discharge flow pattern. This paper presents the results of three different flow pattern interpretation techniques: the best of them (mass-time relationships) is shown to give a very clear identification of the solids flow pattern and the flow channel boundary. (c) 2005 Elsevier Ltd. All rights reserved.