Thin films of alternating maleic acid/anhydride copolymers (poly(octadecene-alt-maleic acid/anhydride), POMA; poly(propene-alt-maleic acid/anhydride), PPMA; poly(styrene-alt-maleic acid/anhydride), PSMA) were studied to unravel the influence of the comonomer characteristics in the backbone on the surface-energetic properties of the copolymer films in the dry state and in contact with aqueous solutions. Water contact angle measurements revealed a graduation of the wettability of the dry hydrolyzed and annealed copolymer films that was dependent on the comonomer unit. It ranged from moderately hydrophilic (PPMA, annealed gamma(sv) = 39.9 mJ/m(2)) to very hydrophobic (POMA, annealed, gamma(sv) = 18.4 mJ/m(2)) surfaces. Liquid-fluid contact angle measurements using captive air bubbles were performed in different aqueous media (pure water, phosphate-buffered saline, and 10(-3) M KCl of two different pH values (pH = 3 and pH = 10) to study the copolymer films in their hydrated states relevant for biointerfacial phenomena. It was found that the graduation of the wettability of the copolymer films in the dry state is overall maintained upon immersion in aqueous solutions. The dependence of the wettability on the pH value of the aqueous medium could be related to the (de)protonation of the carboxylic groups.