Single-phase pressure drop was studied in a region of flow rates that is of particular interest to trickle bed reactors (10 < Re-alpha* < 500). Bed packings were made of uniform-dy sized spherical and non-spherical particles (cylinders, rings, trilobes, and quadralobes). Particles were packed by means of two methods: random close or dense packing (RCP) and random loose packing (RLP) obtaining bed porosities in the range of 0.37-0.52. It is shown that wall effects on pressure drop are negligible as long as the column-to-particle diameter ratio is above 10. Furthermore, the capillary model approach such as the Ergun equation is proven to be a sufficient approximation for typical values of bed porosities encountered in packed bed reactors. However, it is demonstrated that the original Ergun equation is only able to accurately predict the pressure drop of single-phase flow over spherical particles, whereas it systematically under predicts the pressure drop of single-phase flow over non-spherical particles. Special features of differently shaped non-spherical particles have been taken into account through phenomenological and empirical analyses in order to correct/upgrade the original Ergun equation. With the proposed upgraded Ergun equation one is able to predict single-phase pressure drop in a packed bed of arbitrary shaped particles to within +/- 10% on average. This approach has been shown to be far superior to any other available at this time. (c) 2005 Elsevier Ltd. All rights reserved.