A fixed bed is gradually exhausted from top to bottom without backwashing; however, backwashing can rearrange the concentration gradient in the bed. After backwashing, saturated particles which are located at the top of the bed are homogeneously distributed in the bed. The used model to predict adsorption and backwashing effect of organic component is the plug flow pore surface diffusion model (PFPSDM). A sensitivity analysis was performed to determine which parameters have the greatest impact on the model results for components which can represent various organics. In addition, the effects of backwashing were examined by rearranging concentration gradient. For single component sensitivity analysis, the molecular weight was an important parameter. The breakthrough of the smaller molecular weight component was impacted more by backwashing. The SPDFR showed a significant impact on the breakthrough pattern. When surface diffusion was the dominant mechanism, high SPDFR, the breakthrough profile was sharper than when pore diffusion was dominant, low SPDFR. The adsorbability was an important parameter in determining the breakthrough pattern. As expected, the strongly adsorbable component showed the later breakthrough. Backwashing yielded earlier breakthrough for all single components and multi-components examined.