Separation Science and Technology, Vol.40, No.16, 3323-3337, 2005
Maximizing production capacity from an ultrafiltration process at the hanford department of energy waste treatment facility
The Department of Energy has contracted Bechtel National, Inc. to design, construct, and commission a Waste Treatment and Immobilization Plant (WTP) to treat radioactive slurry currently stored in underground waste storage tanks. A critical element of the waste treatment capacity for the WTP is the proper operation of an ultrafiltration process (UFP). The UFP separates supernate solution from radioactive solids. The solution and solid phases are separately immobilized. An oversight review of the UFP design and operation has identified several methods to improve the capacity of the ultrafiltration process, which will also improve the capacity of the WTP. Areas explored were the basis of design, an analysis of the WTP capacity, process chemistry within the UFP, and UFP process control. This article discusses some of the findings of this oversight review in terms of sodium and solid production, which supports the treatment of low activity waste (LAW) associated with the facility, and solid production, which supports the treatment of high level waste (HLW) associated with the facility.
Keywords:mixed waste;process optimization;optimal endpoint solids concentration;ultrafiltration;optimal design