Spherical nickel hydroxide with high density was synthesized via an eddy-circulating precipitation method, in which a Ni(NO3)(2) solution was reacted with a NaOH solution at 65-70 degrees C, and NH4NO3-NH3 center dot H2O was used as a buffer reagent. The resulting nickel hydroxide particles, with a tap density of 2.20 g/cm(3) and the average particle size of 30.6 mu m, are aggregated by the granular crystallites. The morphology of the crystallite can be controlled by changing the anions. The LiNi0.8Co0.2O2 that has been prepared using this nickel hydroxide shows excellent electrochemical performance, which delivers an initial discharge capacity of 190.90 mAh/g at a current rate of 25 mA/g between 3.0 V and 4.35 V and exhibits good cycle stability.