Corn stover is a major crop residue for biomass conversion to produce chemicals and fuels. One of the problems associated with the supply of corn stover to conversion plants is the delivery of feedstock at a low cost. Corn stover has low bulk density and it is difficult to handle. In this study, chopped corn stover samples were compacted in a piston cylinder under three pressure levels (5, 10, 15 MPa) and at three moisture content levels (5%, 10%, 15% (wb)) to produce briquettes. The total energy requirement to compress and extrude briquette ranged from 12 to 30 MJ/t. The briquette density ranged from 650 to 950 kg/m(3) increasing with pressure. Moisture content had also a significant effect on briquette density, durability and stability. Low moisture stover (5-10%) resulted in denser, more stable and more durable briquettes than high moisture stover (15%). (c) 2005 Published by Elsevier Ltd.