Grain size and texture of Ni electrodeposited from sulfamate baths depend greatly on current density. Increasing grain size is observed with increasing current density and the deposit texture changes from (110) at current densities lower than 5 mA cm(-2) to (100) for higher current densities. Co-deposition of Mn modifies the deposit structure by favoring the growth of the (110) texture and decreasing the average grain size even as the current density increases. While the average Mn film content increases with increasing current density, local Mn concentrations are a more complex function of deposition parameters, as indicated by atom probe tomography measurements. In both direct-current plated and pulse plated films, large variations on a nanometer scale in local Mn concentration are observed.