The present work provides a comparative study on the numerical solution of the dynamic population balance equation (PBE) for batch particulate processes undergoing simultaneous particle aggregation, growth and nucleation. The general PBE was numerically solved using three different techniques namely, the Galerkin on finite elements method (GFEM), the generalized method of moments (GMOM) and the stochastic Monte Carlo (MC) method. Numerical simulations were carried out over a wide range of variation of particle aggregation and growth rate models. The performance of the selected techniques was assessed in terms of their numerical accuracy and computational requirements. The numerical results revealed that, in general, the GFEM provides more accurate predictions of the particle size distribution (PSD) than the other two methods, however, at the expense of more computational effort and time. On the other hand, the GMOM yields very accurate predictions of selected moments of the distribution and has minimal computational requirements. However, its main disadvantage is related to its inherent difficulty in reconstructing the original distribution using a finite set of calculated moments. Finally, stochastic MC simulations can provide very accurate predictions of both PSD and its corresponding moments while the MC computational requirements are, in general, lower than those required for the GFEM. (c) 2006 Elsevier Ltd. All rights reserved.