Surface properties of a polymeric coating system have a strong influence on its performance and service life. However, the surface of a polymer coating may have different chemical, physical, and mechanical properties from the bulk. Significant progress has been made during the last three decades in the improvement of coating on materials. It has been established that polymeric blends have great potential in replacing economically many conventional materials because of their high specific strength. It is needed today, constantly, to improve the surface finish of any material for efficiency and shiny appearance in the severity of working environment. In packaging, materials having longer service lives and those are less corrosive are highly used. The effect of polymer based coating on the paper material improves its mechanical properties and flame resistance. Effect of flame retardant polymer coating illuminates the surface of the sheet. Important application of the material sheets will be for corrosion receptivity and humidity resistance of this material will certainly improve. Blends of PMM/PVDF are mainly used to improve piezoelectric properties of PVDF. In the present study we report the measurement of surface properties of thin layer of polymer blend coated on the cardboard sheet substrate material. Polymer blend solutions of PMMA/PVDF was prepared at 90/10 (w/w) proportions in miscible solvent of toluene and DMF. Thin film was prepared on the surface of cardboard by dipping the cardboard material in the solution. Thickness of the dried polymer coated paper sheet was measured to see uniformity of coating and for different concentrations. Surface properties such as flexibility index, yellowness, and gloss reflectance were also measured. The study on these polymer coated paper will help in improving the surface property of paper as well as its use in packaging. (c) 2006 Wiley Periodicals, Inc.