The preparation of microcapsules applied to the fabrication of self-healing composites has been paid more attentions. A new series of microcapsules were prepared by in situ polymerization technology with poly(urea-formaldehyde) (PLJF) as a shell material and a mixture of epoxy resins (diglycidyl ether of bisphenol A: DGEBPA) and 1-butyl glycidyl ether (BGE) as core materials. The microencapsulating process of core material was monitored using optical microscopy (OM). The chemical structure of microcapsule was characterized using Fourier-transform infrared spectroscopy (FTIR). Morphology and shell wall thickness of microcapsule were observed using metalloscope (MS), scanning electron microscopy (SEM) And OM, respectively. The effects of different pre-polymers, weight ratios of urea to formaldehyde (U-F) and the agitation rates on the physical properties of microcapsules were investigated. The storage stability of microcapsules at different times and temperatures was analyzed. The thermal properties of microcapsules were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results indicate that PUF microcapsules containing epoxy resins can be synthesized successfully, and during the microencapsulation, the epoxide rings in epoxy resins are hardly affected by the surrounding media. The rough outer surface of microcapsule is composed of agglomerated PLJF nanoparticles. The size and surface morphology of microcapsule can be controlled by selecting different processing parameters. The microcapsules basically exhibit good storage stability at room temperature, and they are chemically stable before the heating temperature is up to approximately 238 degrees C. (c) 2006 Elsevier Ltd. All rights reserved.