화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.31, No.1, 80-85, January, 2007
Export Citation
실록산 변성 에틸렌프로필렌 고무/고밀도 폴리에틸렌/카본블랙 복합체의 제조와 물성
Preparation and Properties of Siloxane Modified EPDM/HDPE/Carbon Black Composite
이병철, 강두환†
  • 고차구조형 유기산업재료 연구센타 및 단국대학교 고분자공학과
Byoung Chul Lee, and Doo Whan Kang†
  • Hyperstructured Organic Materials Research Center, Department of Polymer Science & Engineering, Dankook University, Seoul 140-714, Korea
E-mail:
초록
Maleic anhydride(MA)와 ethylene-propylene-diene terpolymer(EPDM)를 용액중합으로 말레화 EPDM(MEPDM)을 제조하고 이를 quaternary ammonium silyl polydimethylsiloxane-TCNQ adduct(PST)와 internal mixer(Rheomix 600P)를 사용하여 용융중합으로 MEPDM-g-PST 공중합체를 제조하였다. 고밀도 폴리에틸렌(HDPE)과 MEPDM-g-PST 공중합체 및 카본블랙(5, 10, 15 및 20 phr)을 배합하여 MEPDM-g-PST/ HDPE/CB 복합체(MPEC)를 제조하였고 HDPE와 카본블랙(5, 10, 15 및 20 phr)을 배합하여 HDPE/CB 복합체(PEC)를 각각 제조하였다. MEPDM-g-PDMS 공중합체의 구조는 FTIR을 이용하여 확인하였으며 MA의 최대 그래프트율은 2.35%이였다. 제조한 복합체의 열적 특성을 측정한 결과 MPEC와 PEC는 유사한 열분해 온도를 나타내었다. MPEC의 인장강도는 카본블랙의 함량이 5에서 20 phr로 증가함에 따라 240에서 372 MPa로 증가하였으며 모폴로지를 분석한 결과 PEC보다 MPEC의 경우에서 카본블랙의 분산이 보다 더 잘 이루어졌음을 확인하였다.
Maleic anhydride (MA) modified ethylene-propylene-diene terpolymer (MEPDM) was prepared from solution polymerization. MEPDM-g-PST copolymer was prepared by melt polymerization of maleated EPDM and quaternary ammonium silyl polydimethylsiloxane-7,7,8,8-tetracyanoquinodimethane (TCNQ) adduct (PST) in internal mixer and MEPDM-g-PST/HDPE/CB (MPEC) was prepared by compounding HDPE, MEPDM-g-PST copolymer and carbon black (CB, 5, 10, 15, and 20 phr), and HDPE/ CB(PEC) by compounding HDPE and CB (5, 10, 15, and 20 phr), respectively. The structure of MEPDM- g-PST copolymer was confirmed by measuring the FTIR. The maximum grafting ratio of MA onto EPDM was 2.35%. The thermal and mechanical properties of the composites were measured and dispersion characteristics of CB in matrix show that CB in MPEC was better dispersed than that in PEC composite.
Keywords:quaternary ammonium silyl polydimethylsiloxane;maleated EPDM;7,7,8,8-tetracyanoquinodimethane;carbon black
  1. Chekanov Y, Ohnogi R, Asai S, Sumita M, Polym. J., 30, 381 (1998)
  2. Frydman E, UK Patent 604, 195 I718 14S (1945)
  3. Kohler F, US Patent 3,243,753 (1996)
  4. Ohe K, Natio Y, Jpn. J. Appl. Phys., 10, 99 (1971)
  5. Tang H, Liu ZY, Piao JH, Chen XF, Lou YX, Li SH, J. Appl. Polym. Sci., 51(7), 1159 (1994)
  6. Park SJ, Kim JS, J. Colloid Interface Sci., 244(2), 336 (2001)
  7. Park SJ, Jin JS, J. Colloid Interface Sci., 242(1), 174 (2001)
  8. Hall TJ, US Patent 6,259,997 (2000)
  9. Breuer O, Tchoudakov R, Nakkis M, Siegmann A, J. Appl. Polym. Sci., 73, 1665 (1999)
  10. Chung KT, Sabo A, Pica AP, J. Appl. Phys., 53, 6867 (1982)
  11. Liu YW, Oshima K, Yamauchi T, Shimomura M, Miyauchi S, Synth. Met., 101, 451 (1999)
  12. Feng JY, Chan CM, Polymer, 41(19), 7279 (2000)
  13. Lee BC, Kang DW, Polym.(Korea), 30(3), 224 (2006)
  14. Cimmino S, D'orazio L, Greco R, Maglio G, Malinconico M, Mancarella C, Martuscelli E, Palumbo R, Racosta G, Polym. Eng. Sci., 24, 48 (1984)
  15. Kang DW, Kim BJ, Shim DS, J. Ind. Eng. Chem., 6(4), 270 (2000)
  16. Kastner J, Pichler T, Kuzmany H, Chem. Phys. Lett., 221, 53 (1994)
  17. Wang FX, Gao XP, Lu ZW, Ye SH, Qu JQ, Wu F, Yuan HT, Song DY, J. Alloys Compd., 370, 326 (2004)