In this work the solubility of a Ni-Al anode for MCFC has been studied at atmospheric pressure and two different temperatures using various gas compositions containing H-2/H2O/CO2. It is well known that nickel is dissolved at cathode conditions in an MCFC. However, the results in this study show that nickel can be dissolved also at the anode, indicating that the solubility increases with increasing CO2 partial pressure of the inlet gas and decreasing with increasing temperature. This agrees with the results found by other authors concerning the solubility of NiO at cathode conditions. The dissolution of Ni into the melt can proceed in two ways, either by the reduction of water or by the reduction of carbon dioxide. (c) 2007 Elsevier B.V. All rights reserved.