In this paper, new porous spin-on dielectric (HLO2 (TM), trademark of the LG Ltd.) was studied. The characterizations, such as thermal stability, chemical structure, dielectric constant (k) and mechanical properties (hardness and modulus), of methylsilsesquioxane (MSQ)-based dielectrics were evaluated. An optimized material (k-2.25), characterized by a hardness and a modulus of 1.0 GPa and 6.5 GPa each in association with a porosity of 30% and a mean pore radius of 2.2 nm, was successfully integrated in damascene process with 10 levels of Cu/low-k film for 65 nm technology and beyond. Good electrical results were obtained in metal line resistance and leakage current. (c) 2006 Elsevier B.V. All rights reserved.