Calculations show that oxidation of chromium oxide (Cr2O3) by oxygen and oxidation of chromium hydroxide (Cr(OH)(3)) by manganese dioxide (MnO2) are thermodynamically feasible in both aerobic and mildly anoxic environments. Experiments were carried out to determine the rate and extent of chromium oxidation under various conditions, i.e., when Cr2O3 was heated in the presence of oxygen, when Cr(OH)(3) and MnO2 mixtures were suspended in aerobic or anoxic aqueous media at various pH values, when Cr(OH)(3) and MnO2 mixtures interacted in moist aerobic conditions and when chromium assumed to be Cr(OH)(3) and manganese assumed to be MnO2 interacted in the presence of competing electron donors/acceptors, as is the case in chromium-contaminated sludge. Results indicate that trivalent chromium in Cr2O3 could be readily converted to hexavalent chromium at a temperature range of 200-300 degrees C, with conversion rates of up to 50% in 12 h. In aqueous media, Cr(OH)3 was slowly converted to dissolved Cr(VI) in the presence of MnO2, both in aerobic and anoxic conditions, with conversion rates of up to 1% in 60 days. In moist aerobic conditions and in the presence of MnO2, Cr(OH)(3) slowly converted to hexavalent chromium, with up to 0.05% conversion observed in 90 days. Chromium oxidation also occurred in sludge samples, especially under aerobic conditions. However, such transformation was found to be transitory, with the Cr(VI) formed being ultimately reduced back to Cr(HI) due to the presence of various reducing agents in the sludge. Nevertheless since up to 17% conversion of Cr(HI) to Cr(VI) occurred in sludge under aerobic conditions by 30 days, there is real danger under field conditions of spreading Cr(VI) pollution due to possible intervening rainfall, runoff and percolation. (c) 2005 Elsevier B.V. All rights reserved.