A laser scanning with gas jet process was developed to prepare alumina platelets from an alumina powder. When the carbondioxide laser scanned the alumina powdery coatings prepared using an electrospraying technique, the alumina particles were heated to a melting state. The coaxial gas ejection force pushed the melting particles to obtain tabular shape grains that recrystallized into alumina platelets in the subsequent rapid-cool solidification. The phase and morphologies of powder bed were characterized by XRD and SEM. Results show that only alpha-alumina platelets were formed in the scanning process and the average edge length and thickness is 10 mum and 1-2 mum, respectively. Laser processing parameters such as laser energy density, scanning speed, and gas pressure were expected to play a vital role in the melting-crystallization-solidification process for obtaining platelike grains from powder beds. The preliminary experiment showed that the laser-scanning technique could be an effective means of tailoring the morphologies of particles to meet application requirements.