Journal of Crystal Growth, Vol.220, No.4, 579-591, 2000
Hydration of calcium sulfate hemihydrate (CaSO4 center dot 1/2H2O) into gypsum (CaSO4 center dot 2H(2)O). The influence of the sodium poly(acrylate)/surface interaction and molecular weight
The retarding influence of sodium poly(acrylate) (PANa) on the hydration of calcium sulfate hemihydrate (CaSO(4)1/2H(2)O) was investigated. This study reports the influence of sodium poly(acrylate) on hemihydrate dissolution, on homogenous and heterogeneous gypsum (CaSO4. 2H(2)O) nucleation as well as on gypsum growth. It is shown that adsorption of PANa does not hinder the dissolution of hemihydrate in the present experimental conditions. The specific interaction of PANa with gypsum can explain the oriented growth of gypsum crystal. The gypsum growth is slowed down but cannot be blocked by the adsorption of PANa. On the other hand, PANa can block the heterogeneous and homogenous gypsum nucleation. As soon Its a critical surface density of PANa onto the hemihydrate surface is reached, the heterogeneous gypsum nucleation is prevented and hemihydrate hydration is indefinitely blocked. The interaction between PANa and the hemihydrate surface is of prime importance to control hydration. Also, the influence of the molecular weight of PANa on homogenous nucleation has been investigated. The precipitation of calcium polyacrylate can explain the differences between the two molecular weights used (2100 and 20 000). This work leads to the conclusion that heterogeneous nucleation is the key process that controls hydration of a system in which hemihydrate dissolution, gypsum nucleation and growth are all occurring at the same time in a continuous manner.