A newly designed lead zirconate titanate (PZT) solid solution 0.1 Pb(Zn0.5W0.5)O-3-0.9Pb(Zr0.5Ti0.5)O-3 was prepared. It is feasible for a low temperature firing. X-ray diffraction shows that its structure is a single perovskite phase, and its thick films were successfully fabricated on a Pt/TiO2/SiNx/Si-substrate through the screen printing method. A conventional screen printing thick film and a hybrid thick film (screen printing and PZT sol infiltration) was also compared. According to an SEM study, the prepared thick film showed a much denser microstructure with the sol infiltration method. The electrical properties of the prepared PZT solid solution and its thick film were predominantly realized in a low temperature region. The dielectric constant of a conventional screen printing thick film and the hybrid thick film (sintered at 900 degrees C), was 703.5 and 911.3, respectively. (c) 2006 Elsevier B.V. All rights reserved.