Applied Surface Science, Vol.253, No.5, 2652-2656, 2006
Effects of in situ thermal annealing on the structural, optical, and electrical properties in Hg0.7Cd0.3Te epilayers grown on CdTe buffer layers
Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) transmission, and Hall effect measurements were performed to investigate the structural, optical, and electrical properties of as-grown and in situ-annealed Hg0.7Cd0.3Te epilayers grown on CdTe buffer layers by using molecular beam epitaxy. After the Hg0.7Cd0.3Te epilayers had been annealed in a Hg-cell flux atmosphere, the SEM images showed that the surface morphologies of the Hg0.7Cd0.3Te thin films were mirror-like with no indication of pinholes or defects, and the FTIR spectra showed that the transmission intensities had increased in comparison to that of the as-grown Hg0.7Cd0.3Te epilayer. Hall-effect measurements showed that n-Hg0.7Cd0.3Te epilayers were converted to p-Hg0.7Cd0.3Te epilayers. These results indicate that the surface, optical, and electrical proper-ties of the Hg1-xCdxTe epilayers are improved by annealing and that as-grown n-Hg1-xCdxTe epilayers can be converted to p-Hg1-xCdxTe epilayers by in situ annealing. (c) 2006 Elsevier B.V. All rights reserved.
Keywords:thermal annealing effect;molecular beam epitaxy;optical properties;semiconductors;surface morphology