The paper presents a study on the preparation of Al2O3 ceramic coating on AZ91HP Mg alloy by laser remelting plasma-sprayed coating. It was found that after laser remelting, the coating exhibited obvious layer-like characteristics due to influence of temperature distribution, thermophysical parameters and layer thickness. According to the microstructural difference, the coating can be divided into the melted zone with the alpha-Al2O3 column-like crystal, the sintered zone with flock-like structure, the residual plasma-sprayed zone with loosened structure. Because of the dense column-like crystal, the hardness, wear and corrosion resistance of the laser remelted coating are much higher than those of the plasma-sprayed coating and as-received Mg alloy. (c) 2006 Elsevier B.V. All rights reserved.