In a previous work (part 1), nanocomposite materials were obtained using a latex of either unvulcanized or prevulcanized natural rubber as the matrix and a colloidal suspension of crab chitin whiskers as the reinforcing phase. The mechanical behavior of the resulting nanocomposite films was analyzed in both the linear and the nonlinear range in the present study. The effects of the filler and processing technique were evaluated, and the results are discussed based on the knowledge of the structural morphology and swelling behavior reported in our previous work. The reinforcing effect of chitin whiskers strongly depended on their ability to form a rigid three-dimensional network, resulting from strong interactions such as hydrogen bonds between the whiskers. The results emanating from the successive tensile test experiments give clear evidence for the presence of a three-dimensional chitin network within the evaporated samples. Cross-linking of the matrix was found to interfere with the formation of this network.