The blends of two anthracite powders (YQ and JC) with a fat coal (C4) or a petroleum pitch (PP) or a coal tar pitch (CTP) in different proportions were co-carbonized at 3 degrees C/min up to 1000 degrees C in an experimental 1 Kg coke oven. Coke yield, coke particulate size, coke micro-strength and coke cracking strength were measured respectively. Coke optical textures were watched under a microscope. The results show that as anthracite proportion increases, coke yields of all blends improve; > 0.8 mm lump coke yields of blends with CTP or PP decline slightly, blends with C4 drop heavily; coke microstrengths do not change sharply, and coke cracking strength of blends with C4 or PP decrease more than blends with CTP. C4 produces fine-grained mosaics, and two anthracites are mainly fusinite and fragments, PP is coarse-grained mosaics, and CTP is chiefly flow or domain textures. Independent optical textures were observed in cokes. There exist evident borders between the two contact optical textures which were produced by different components, and a few phenomena that domain or flow textures penetrating into fusinite appeared in the blends. It seems that CTP is the best adhesives for blending with anthracites for producing high quality cokes.