The production of an intermediate temperature-stable (ITS) alpha-amylase from Aspergillus oryzae was studied by using a central composite design with three independent variables, viz., starch, yeast extract, and K2HPO4. The model equation provided a suitable model for the response surface for alpha-amylase production, and, from the optimal concentrations of the medium components, a model was predicted, which was then used for enzyme production in a 150-L bioreactor. In the bioreactor studies, the enzyme yields (161 U/ml) were similar to that of the shake flask (133 U/ml); however, the time required for maximum alpha-amylase production in the bioreactor was reduced to 48 h compared with 120 It in shake flask cultures. An increased level of phosphate in the medium and low inoculum size were necessary to control the excessive foaming in the bioreactor; however, control of the pO(2) level and agitation was not mandatory for enzyme production. The peak enzyme production coincided with the increase in pH of the fermentation broth and was maximal when the pH of the system was above 7.5. Thus, in the present study, pH acted as an indicator of the initiation or end of the enzyme synthesis or of the fermentation cycle.